diff preprocessing.sh @ 17:31f25b37187b draft

Uploaded

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/preprocessing.sh	Wed Feb 11 06:27:12 2015 -0500
@@ -0,0 +1,156 @@
+#!/bin/bash
+
+####################################################################################################
+#Copyright (C) 2014 Lukasz Kielpinski, Nikos Sidiropoulos
+
+#This program is free software: you can redistribute it and/or modify it under the terms of the
+#GNU General Public License as published by the Free Software Foundation, either version 3 of the
+#License, or (at your option) any later version.
+
+#This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without
+#even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#GNU General Public License for more details (http://www.gnu.org/licenses/).
+####################################################################################################
+
+#Preprocessing workflow - Read debarcoding and trimming.
+
+function print_help {
+cat <<End-of-message
+RNA probing data preprocessing.
+Read trimming and debarcoding.
+-------------------------------------
+Input arguments:
+-h: Help
+-1: Read1 (FASTQ) - Required
+-2: Read2 (FASTQ) - Optional
+-b: Barcode signature
+-t: Trimming length
+-o: Output folder (Default: "output_dir")
+-------------------------------------
+Usage : preprocessing.sh -f <READ1> -r <READ2> -b <BARCODE_SEQ> -t <TRIM_LENGTH> -o <output_dir>
+End-of-message
+exit
+}
+
+#defaults
+output_dir="./output_dir"
+read2=""
+trim_length=0
+
+#parse input
+while getopts h1:2:b:t:o: myarg
+do      case "$myarg" in
+        h)      print_help
+                exit ;;
+        1)      read1="$OPTARG" ;; #required
+        2)      read2="$OPTARG" ;; #optional
+        b)      barcode="$OPTARG" ;; #optional
+        t)      trim_length="$OPTARG" ;; #optional
+        o)      output_dir="$OPTARG" ;; #optional
+        [?])    echo "ERROR: Unknown parameter"
+                print_help
+                exit 1 ;;
+        esac
+done
+
+if [[ -z $read1 ]]; then
+  echo "ERROR: Read1 file required!"
+  print_help
+  exit 1
+fi
+
+# Create the output folder
+mkdir -p $output_dir
+
+if [ -z "$barcode" ]; then
+    barcode=''
+fi
+BAR_LENGTH=`eval echo ${#barcode}`
+
+###################################################################################################
+# Convert the Barcode signature to a regular exression.
+
+# Example:
+#
+# Barcode in the oligo used: NWTRYSNNNN
+# Which means that each proper read must begin with: NNNN(C|G)(A|G)(C|T)A(A|T)N
+# As regex:
+# ^[ACGT][ACGT][ACGT][ACGT][CG][AG][CT][A][AT][ACGT]
+# Reverse complement the barcode sequence and create a regular expression.
+
+REV_COMPLEMENT=$(perl -0777ne's/\n //g; tr/ATGCatgcNnYyRrKkMmBbVvDdHh/TACGtacgNnRrYyMmKkVvBbHhDd/; print scalar reverse $_;' <(echo $barcode))
+
+REG_EXP=$(sed 's/A/[A]/g;s/C/[C]/g;s/G/[G]/g;s/T/[T]/g;s/R/[AG]/g;s/Y/[CT]/g;s/S/[GC]/g;s/W/[AT]/g;s/K/[GT]/g;s/M/[AC]/g;s/B/[CGT]/g;s/D/[AGT]/g;s/H/[ACT]/g;s/V/[ACG]/g;s/N/[AGCTN]/g;' <<< $REV_COMPLEMENT)
+
+###################################################################################################
+#Remove reads that do not start with the signature (Read1)
+
+#First awk removes them, second awk removes corresponding quality strings.
+#Remove last N nt - may be derived from the random primers.
+
+awk '{if(NR%4==2){if(/^'"$REG_EXP"'/){print}else{print ""}}else{print}}' $read1 |
+
+awk 'BEGIN{trim_flag=0; trimming_stats=0; all_processed=0}
+{
+    if(NR%4==1){print; all_processed++}
+    if(NR%4==2){if(length($1)==0){trim_flag=1;trimming_stats++}else{trim_flag=0};print}
+    if(NR%4==3){print}
+    if(NR%4==0){if(trim_flag==1){print ""}else{print $0}}
+}END{print(trimming_stats, all_processed) > "trimming_stats.error"}' |
+
+awk -v len="${trim_length}" '{if(NR%2==0){print(substr($1,0,length($1)-len))}else{print}}' > R1.fastq &
+
+wait
+
+mv trimming_stats.error $output_dir/trimming_stats.txt
+
+###################################################################################################
+#Trim primers and possible random barcode
+
+if [ -z "$read2" ]; then
+    #single-end
+
+    #Extract the barcode sequence from the first read:
+    awk -v len="${BAR_LENGTH}" '{if(NR%2==0){print(substr($0,len+1,length($0)))}else{print($0)}}' R1.fastq | awk '{print($1)}' > $output_dir/read1.fastq &
+
+    awk -v len="${BAR_LENGTH}" '{if(NR%4==1){print($1)}else{if(NR%4==2){print(substr($0,0,len))}}}' R1.fastq | paste - - > $output_dir/barcodes.txt &
+
+    wait
+
+    #Remove temp files
+    rm R1.fastq
+
+else
+    #paired-end
+
+    #Trim primers (Read2)
+    awk -v len1="${trim_length}" -v len2="${BAR_LENGTH}" '{if(NR%2==0){print(substr($0,len1+1,(length($0)-len1-len2)))}else{print($0)}}' $read2 > R2.fastq
+
+    ## Fix pairs in Read1 and Read2 fastq files
+    #Sort
+    awk '{print($1)}' R1.fastq | paste - - - - | awk '(NF==4){print $0}' | sort -S1G -k1,1 > R1_collapsed.fastq &
+    awk '{print($1)}' R2.fastq | paste - - - - | awk '(NF==4){print $0}' | sort -S1G -k1,1 > R2_collapsed.fastq &
+
+    wait
+
+    join -1 1 -2 1 R1_collapsed.fastq R2_collapsed.fastq > joined.fastq
+
+    awk 'BEGIN{OFS=""}{print($1"\n"$2"\n"$3"\n"$4)}' joined.fastq > R1_sorted.fastq &
+    awk 'BEGIN{OFS=""}{print($1"\n"$5"\n"$6"\n"$7)}' joined.fastq > $output_dir/read2.fastq &
+
+    wait
+
+    rm joined.fastq R1_collapsed.fastq R2_collapsed.fastq R1.fastq R2.fastq &
+
+    ########################################################################
+    #Extract the barcode sequence from the first read:
+    awk -v len="${BAR_LENGTH}" '{if(NR%2==0){print(substr($0,len+1,length($0)))}else{print($0)}}' R1_sorted.fastq | awk '{print($1)}' > $output_dir/read1.fastq &
+
+    awk -v len="${BAR_LENGTH}" '{if(NR%4==1){print($1)}else{if(NR%4==2){print(substr($0,0,len))}}}' R1_sorted.fastq | paste - - > $output_dir/barcodes.txt &
+
+    wait
+
+    #Remove temp files
+    rm R1_sorted.fastq
+
+fi