changeset 2:2da2565f2e50 draft default tip

Uploaded
author fubar
date Sun, 18 Apr 2021 04:50:00 +0000
parents f33aaec1f2c9
children
files toolfactory/LICENSE toolfactory/README.md
diffstat 2 files changed, 884 insertions(+), 0 deletions(-) [+]
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/toolfactory/LICENSE	Sun Apr 18 04:50:00 2021 +0000
@@ -0,0 +1,504 @@
+GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 2.1, February 1999
+
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+(This is the first released version of the Lesser GPL.  It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.)
+
+                            Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+  This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it.  You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations below.
+
+  When we speak of free software, we are referring to freedom of use,
+not price.  Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+  To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights.  These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  To protect each distributor, we want to make it very clear that
+there is no warranty for the free library.  Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+
+  Finally, software patents pose a constant threat to the existence of
+any free program.  We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder.  Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+  Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License.  This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License.  We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+  When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library.  The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom.  The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+  We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License.  It also provides other free software developers Less
+of an advantage over competing non-free programs.  These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries.  However, the Lesser license provides advantages in certain
+special circumstances.
+
+  For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it becomes
+a de-facto standard.  To achieve this, non-free programs must be
+allowed to use the library.  A more frequent case is that a free
+library does the same job as widely used non-free libraries.  In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+  In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software.  For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+  Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+
+                  GNU LESSER GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+  6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.  If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Use a suitable shared library mechanism for linking with the
+    Library.  A suitable mechanism is one that (1) uses at run time a
+    copy of the library already present on the user's computer system,
+    rather than copying library functions into the executable, and (2)
+    will operate properly with a modified version of the library, if
+    the user installs one, as long as the modified version is
+    interface-compatible with the version that the work was made with.
+
+    c) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.
+
+    d) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    e) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded.  In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+                            NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+                     END OF TERMS AND CONDITIONS
+
+           How to Apply These Terms to Your New Libraries
+
+  If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change.  You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms of the
+ordinary General Public License).
+
+  To apply these terms, attach the following notices to the library.  It is
+safest to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+    {description}
+    Copyright (C) {year} {fullname}
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301
+    USA
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the
+  library `Frob' (a library for tweaking knobs) written by James Random
+  Hacker.
+
+  {signature of Ty Coon}, 1 April 1990
+  Ty Coon, President of Vice
+
+That's all there is to it!
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/toolfactory/README.md	Sun Apr 18 04:50:00 2021 +0000
@@ -0,0 +1,380 @@
+## Breaking news! Docker container at https://github.com/fubar2/toolfactory-galaxy-docker recommended as at December 2020
+
+### New demonstration of planemo tool_factory command ![Planemo ToolFactory demonstration](images/lintplanemo-2021-01-08_18.02.45.mkv?raw=false "Demonstration inside Planemo")
+
+## This is the original ToolFactory suitable for non-docker situations. Please use the docker container if you can because it's integrated with a Toolshed...
+
+# WARNING
+
+Install this tool to a throw-away private Galaxy or Docker container ONLY!
+
+Please NEVER on a public or production instance where a hostile user may
+be able to gain access if they can acquire an administrative account login.
+
+It only runs for server administrators - the ToolFactory tool will refuse to execute for an ordinary user since
+it can install new tools to the Galaxy server it executes on! This is not something you should allow other than
+on a throw away instance that is protected from potentially hostile users.
+
+## Short Story
+
+Galaxy is easily extended to new applications by adding a new tool. Each new scientific computational package added as
+a tool to Galaxy requires an XML document describing how the application interacts with Galaxy.
+This is sometimes termed "wrapping" the package because the instructions tell Galaxy how to run the package
+as a new Galaxy tool. Any tool that has been wrapped is readily available to all the users through a consistent
+and easy to use interface once installed in the local Galaxy server.
+
+Most Galaxy tool wrappers have been manually prepared by skilled programmers, many using Planemo because it
+automates much of the boilerplate and makes the process much easier.
+The ToolFactory (TF) now uses Planemo under the hood for testing, but hides the command
+line complexities. The user will still need appropriate skills in terms of describing the interface between
+Galaxy and the new application, but will be helped by a Galaxy tool form to collect all the needed
+settings, together with automated testing and uploading to a toolshed with optional local installation.
+
+
+## ToolFactory generated tools are ordinary Galaxy tools
+
+A TF generated tool that passes the Planemo test is ready to publish in any Galaxy Toolshed and ready to install in any running Galaxy instance.
+They are fully workflow compatible and work exactly like any hand-written tool. The user can select input files of the specified type(s) from their
+history and edit each of the specified parameters. The tool form will show all the labels and help text supplied when the tool was built. When the tool
+is executed, the dependent binary or script will be passed all the i/o files and parameters as specified, and will write outputs to the specified new
+history datasets - just like any other Galaxy tool.
+
+## Models for tool command line construction
+
+The key to turning any software package into a Galaxy tool is the automated construction of a suitable command line.
+
+The TF can build a new tool that will allow the tool user to select input files from their history, set any parameters and when run will send the
+new output files to the history as specified when the tool builder completed the form and built the new tool.
+
+That tool can contain instructions to run any Conda dependency or a system executable like bash. Whether a bash script you have written or
+a Conda package like bwa, the executable will expect to find settings for input, output and parameters on a command line.
+
+These are often passed as "--name value" (argparse style) or in a fixed order (positional style).
+
+The ToolFactory allows either, or for "filter" applications that process input from STDIN and write processed output to STDOUT.
+
+The simplest tool model wraps a simple script or Conda dependency package requiring only input and output files, with no user supplied settings illustrated by
+the Tacrev demonstration tool found in the Galaxy running in the ToolFactory docker container. It passes a user selected input file from the current history on STDIN
+to a bash script. The bash script runs the unix tac utility (reverse cat) piped to the unix rev (reverse lines in a text file) utility. It's a one liner:
+
+`tac | rev`
+
+The tool building form allows zero or more Conda package name(s) and version(s) and an optional script to be executed by either a system
+executable like ``bash`` or the first of any named Conda dependency package/version. Tacrev uses a tiny bash script shown above and uses the system
+bash. Conda bash can be specified if it is important to use the same version consistently for the tool.
+
+On the tool form, the repeat section allowing zero or more input files was set to be a text file to be selected by the tool user and
+in the repeat section allowing one or more outputs, a new output file with special value `STDOUT` as the positional parameter, causes the TF to
+generate a command to capture STDOUT and send it to the new history file containing the reversed input text.
+
+By reversed, we mean really, truly reversed.
+
+That simple model can be made much more complicated, and can pass inputs and outputs as named or positional parameters,
+to allow more complicated scripts or dependent binaries that require:
+
+1. Any number of input data files selected by the user from existing history data
+2. Any number of output data files written to the user's history
+3. Any number of user supplied parameters. These can be passed as command line arguments to the script or the dependency package. Either
+positional or named (argparse) style command line parameter passing can be used.
+
+More complex models can be seen in the Sedtest, Pyrevpos and Pyrevargparse tools illustrating positional and argparse parameter passing.
+
+The most complex demonstration is the Planemo advanced tool tutorial BWA tool. There is one version using a command-override to implement
+exactly the same command structure in the Planemo tutorial. A second version uses a bash script and positional parameters to achieve the same
+result. Some tool builders may find the bash version more familiar and cleaner but the choice is yours.
+
+## Overview
+
+![IHello example ToolFactory tool form](files/hello_toolfactory_form.png?raw=true "Part of the Hello world example ToolFactory tool form")
+
+
+Steps in building a new Galaxy tool are all conducted through Galaxy running in the docker container:
+
+1. Login to the Galaxy running in the container at http://localhost:8080 using an admin account. They are specified in config/galaxy.yml and
+    in the documentation at
+    and the ToolFactory will error out and refuse to run for non-administrative tool builders as a minimal protection from opportunistic hostile use.
+
+2. Start the TF and fill in the form, providing sample inputs and parameter values to suit the Conda package being wrapped.
+
+3. Execute the tool to create a new XML tool wrapper using the sample inputs and parameter settings for the inbuilt tool test. Planemo runs twice.
+    firstly to generate the test outputs and then to perform a proper test. The completed toolshed archive is written to the history
+    together with the planemo test report. Optionally the new tool archive can be uploaded
+    to the toolshed running in the same container (http://localhost:9009) and then installed inside the Galaxy in the container for further testing.
+
+4. If the test fails, rerun the failed history job and correct errors on the tool form before rerunning until everything works correctly.
+
+![How it works](files/TFasIDE.png?raw=true "Overview of the ToolFactory as an Integrated Development Environment")
+
+## Planning and building new Galaxy tool wrappers.
+
+It is best to have all the required planning done to wrap any new script or binary before firing up the TF.
+Conda is the only current dependency manager supported. Before starting, at the very least, the tool builder will need
+to know the required software package name in Conda and the version to use, how the command line for
+the package must be constructed, and there must be sample inputs in the working history for each of the required data inputs
+for the package, together with values for every parameter to suit these sample inputs. These are required on the TF form
+for preparing the inbuilt tool test. That test is run using Planemo, as part of the tool generation process.
+
+A new tool is specified by filling in the usual Galaxy tool form.
+
+The form starts with a new tool name. Most tools will need dependency packages and versions
+for the executable. Only Conda is currently supported.
+
+If a script is needed, it can be pasted into a text box and the interpreter named. Available system executables
+can be used such as bash, or an interpreter such as python, perl or R can be nominated as conda dependencies
+to ensure reproducible analyses.
+
+The tool form will be generated from the input data and the tool builder supplied parameters. The command line for the
+executable is built using positional or argparse (named e.g. --input_file /foo/baz) style
+parameters and is completely dependent on the executable. These can include:
+
+1. Any number of input data sets needed by the executable. Each appears to the tool user on the run form and is included
+on the command line for the executable. The tool builder must supply a small representative sample for each one as
+an input for the automated tool test.
+
+2. Any number of output data sets generated by the package can be added to the command line and will appear in
+the user's history at the end of the job
+
+3. Any number of text or numeric parameters. Each will appear to the tool user on the run form and are included
+on the command line to the executable. The tool builder must supply a suitable representative value for each one as
+the value to be used for the automated tool test.
+
+Once the form is completed, executing the TF will build a new XML tool wrapper
+including a functional test based on the sample settings and data.
+
+If the Planemo test passes, the tool can be optionally uploaded to the local Galaxy used in the image for more testing.
+
+A local toolshed runs inside the container to allow an automated installation, although any toolshed and any accessible
+Galaxy can be specified for this process by editing the default URL and API keys to provide appropriate credentials.
+
+## Generated Tool Dependency management
+
+Conda is used for all dependency management although tools that use system utilities like sed, bash or awk
+may be available on job execution nodes. Sed and friends are available as Conda (conda-forge) dependencies if necessary.
+Versioned Conda dependencies are always baked-in to the tool and will be used for reproducible calculation.
+
+## Requirements
+
+These are all managed automagically. The TF relies on galaxyxml to generate tool xml and uses ephemeris and
+bioblend to load tools to the toolshed and to Galaxy. Planemo is used for testing and runs in a biocontainer currently at
+https://quay.io/fubar2/planemo-biocontainer
+
+## Caveats
+
+This docker image requires privileged mode so exposes potential security risks if hostile tool builders gain access.
+Please, do not run it in any situation where that is a problem - never, ever on a public facing Galaxy server.
+On a laptop or workstation should be fine in a non-hostile environment.
+
+
+## Example generated XML
+
+For the bwa-mem example, a supplied bash script is included as a configfile and so has escaped characters.
+```
+<tool name="bwatest" id="bwatest" version="0.01">
+  <!--Cite: Creating re-usable tools from scripts doi:10.1093/bioinformatics/bts573-->
+  <!--Source in git at: https://github.com/fubar2/toolfactory-->
+  <!--Created by admin@galaxy.org at 30/11/2020 07:12:10 using the Galaxy Tool Factory.-->
+  <description>Planemo advanced tool building sample bwa mem mapper as a ToolFactory demo</description>
+  <requirements>
+    <requirement version="0.7.15" type="package">bwa</requirement>
+    <requirement version="1.3" type="package">samtools</requirement>
+  </requirements>
+  <configfiles>
+    <configfile name="runme"><![CDATA[
+REFFILE=\$1
+FASTQ=\$2
+BAMOUT=\$3
+rm -f "refalias"
+ln -s "\$REFFILE" "refalias"
+bwa index -a is "refalias"
+bwa mem -t "2"  -v 1 "refalias" "\$FASTQ"  > tempsam
+samtools view -Sb tempsam > temporary_bam_file.bam
+samtools sort -o "\$BAMOUT" temporary_bam_file.bam
+
+]]></configfile>
+  </configfiles>
+  <version_command/>
+  <command><![CDATA[bash
+$runme
+$input1
+$input2
+$bam_output]]></command>
+  <inputs>
+    <param optional="false" label="Reference sequence for bwa to map the fastq reads against" help="" format="fasta" multiple="false" type="data" name="input1" argument="input1"/>
+    <param optional="false" label="Reads as fastqsanger to align to the reference sequence" help="" format="fastqsanger" multiple="false" type="data" name="input2" argument="input2"/>
+  </inputs>
+  <outputs>
+    <data name="bam_output" format="bam" label="bam_output" hidden="false"/>
+  </outputs>
+  <tests>
+    <test>
+      <output name="bam_output" value="bam_output_sample" compare="sim_size" format="bam" delta_frac="0.1"/>
+      <param name="input1" value="input1_sample"/>
+      <param name="input2" value="input2_sample"/>
+    </test>
+  </tests>
+  <help><![CDATA[
+
+**What it Does**
+
+Planemo advanced tool building sample bwa mem mapper
+
+Reimagined as a bash script for a ToolFactory demonstration
+
+
+------
+
+Script::
+
+    REFFILE=$1
+    FASTQ=$2
+    BAMOUT=$3
+    rm -f "refalias"
+    ln -s "$REFFILE" "refalias"
+    bwa index -a is "refalias"
+    bwa mem -t "2"  -v 1 "refalias" "$FASTQ"  > tempsam
+    samtools view -Sb tempsam > temporary_bam_file.bam
+    samtools sort -o "$BAMOUT" temporary_bam_file.bam
+
+]]></help>
+</tool>
+
+```
+
+
+
+## More Explanation
+
+The TF is an unusual Galaxy tool, designed to allow a skilled user to make new Galaxy tools.
+It appears in Galaxy just like any other tool but outputs include new Galaxy tools generated
+using instructions provided by the user and the results of Planemo lint and tool testing using
+small sample inputs provided by the TF user. The small samples become tests built in to the new tool.
+
+It offers a familiar Galaxy form driven way to define how the user of the new tool will
+choose input data from their history, and what parameters the new tool user will be able to adjust.
+The TF user must know, or be able to read, enough about the tool to be able to define the details of
+the new Galaxy interface and the ToolFactory offers little guidance on that other than some examples.
+
+Tools always depend on other things. Most tools in Galaxy depend on third party
+scientific packages, so TF tools usually have one or more dependencies. These can be
+scientific packages such as BWA or scripting languages such as Python and are
+managed by Conda. If the new tool relies on a system utility such as bash or awk
+where the importance of version control on reproducibility is low, these can be used without
+Conda management - but remember the potential risks of unmanaged dependencies on computational
+reproducibility.
+
+The TF user can optionally supply a working script where scripting is
+required and the chosen dependency is a scripting language such as Python or a system
+scripting executable such as bash. Whatever the language, the script must correctly parse the command line
+arguments it receives at tool execution, as they are defined by the TF user. The
+text of that script is "baked in" to the new tool and will be executed each time
+the new tool is run. It is highly recommended that scripts and their command lines be developed
+and tested until proven to work before the TF is invoked. Galaxy as a software development
+environment is actually possible, but not recommended being somewhat clumsy and inefficient.
+
+Tools nearly always take one or more data sets from the user's history as input. TF tools
+allow the TF user to define what Galaxy datatypes the tool end user will be able to choose and what
+names or positions will be used to pass them on a command line to the package or script.
+
+Tools often have various parameter settings. The TF allows the TF user to define how each
+parameter will appear on the tool form to the end user, and what names or positions will be
+used to pass them on the command line to the package. At present, parameters are limited to
+simple text and number fields. Pull requests for other kinds of parameters that galaxyxml
+can handle are welcomed.
+
+Best practice Galaxy tools have one or more automated tests. These should use small sample data sets and
+specific parameter settings so when the tool is tested, the outputs can be compared with their expected
+values. The TF will automatically create a test for the new tool. It will use the sample data sets
+chosen by the TF user when they built the new tool.
+
+The TF works by exposing *unrestricted* and therefore extremely dangerous scripting
+to all designated administrators of the host Galaxy server, allowing them to
+run scripts in R, python, sh and perl. For this reason, a Docker container is
+available to help manage the associated risks.
+
+## Scripting uses
+
+To use a scripting language to create a new tool, you must first prepared and properly test a script. Use small sample
+data sets for testing. When the script is working correctly, upload the small sample datasets
+into a new history, start configuring a new ToolFactory tool, and paste the script into the script text box on the TF form.
+
+### Outputs
+
+The TF will generate the new tool described on the TF form, and test it
+using planemo. Optionally if a local toolshed is running, it can be used to
+install the new tool back into the generating Galaxy.
+
+A toolshed is built in to the Docker container and configured
+so a tool can be tested, sent to that toolshed, then installed in the Galaxy
+where the TF is running using the default toolshed and Galaxy URL and API keys.
+
+Once it's in a ToolShed, it can be installed into any local Galaxy server
+from the server administrative interface.
+
+Once the new tool is installed, local users can run it - each time, the
+package and/or script that was supplied when it was built will be executed with the input chosen
+from the user's history, together with user supplied parameters. In other words, the tools you generate with the
+TF run just like any other Galaxy tool.
+
+TF generated tools work as normal workflow components.
+
+
+## Limitations
+
+The TF is flexible enough to generate wrappers for many common scientific packages
+but the inbuilt automation will not cope with all possible situations. Users can
+supply overrides for two tool XML segments - tests and command and the BWA
+example in the supplied samples workflow illustrates their use. It does not deal with
+repeated elements or conditional parameters such as allowing a user to choose to see "simple"
+or "advanced" parameters (yet) and there will be plenty of packages it just
+won't cover - but it's a quick and efficient tool for the other 90% of cases. Perfect for
+that bash one liner you need to get that workflow functioning correctly for this
+afternoon's demonstration!
+
+## Installation
+
+The Docker container https://github.com/fubar2/toolfactory-galaxy-docker/blob/main/README.md
+is the best way to use the TF because it is preconfigured
+to automate new tool testing and has a built in local toolshed where each new tool
+is uploaded. If you grab the docker container, it should just work after a restart and you
+can run a workflow to generate all the sample tools. Running the samples and rerunning the ToolFactory
+jobs that generated them allows you to add fields and experiment to see how things work.
+
+It can be installed like any other tool from the Toolshed, but you will need to make some
+configuration changes (TODO write a configuration). You can install it most conveniently using the
+administrative "Search and browse tool sheds" link. Find the Galaxy Main
+toolshed at https://toolshed.g2.bx.psu.edu/ and search for the toolfactory
+repository in the Tool Maker section. Open it and review the code and select the option to install it.
+
+If not already there please add:
+
+```
+<datatype extension="tgz" type="galaxy.datatypes.binary:Binary" mimetype="multipart/x-gzip" subclass="True" />
+```
+
+to your local config/data_types_conf.xml.
+
+
+## Restricted execution
+
+The tool factory tool itself will ONLY run for admin users -
+people with IDs in config/galaxy.yml "admin_users".
+
+*ONLY admin_users can run this tool*
+
+That doesn't mean it's safe to install on a shared or exposed instance - please don't.
+
+## Generated tool Security
+
+Once you install a generated tool, it's just
+another tool - assuming the script is safe. They just run normally and their
+user cannot do anything unusually insecure but please, practice safe toolshed.
+Read the code before you install any tool. Especially this one - it is really scary.
+
+## Attribution
+
+Creating re-usable tools from scripts: The Galaxy Tool Factory
+Ross Lazarus; Antony Kaspi; Mark Ziemann; The Galaxy Team
+Bioinformatics 2012; doi: 10.1093/bioinformatics/bts573
+
+http://bioinformatics.oxfordjournals.org/cgi/reprint/bts573?ijkey=lczQh1sWrMwdYWJ&keytype=ref
+